select
Пульт управления DPF1С с дисплеем

Пульт управления DPF1С с дисплеем

DPF1С  - отличный выбор для широкого ассортимента столов и рабочих станций, которым необходим пульт с отображением данных о высоте.

Особенностью серии настольных пультов DPF является новый современный дизайн, который сочетает классический внешний вид с интуитивно понятным и практичным использованием. Кнопки «вверх» и «вниз» сделаны «сверхудобными» для пользователя - их форма «соответствует функции». Пользователь на ощупь чувствует разницу и может не глядеть на кнопки, управляя работой системы.

Пульт DPF1С оборудован дисплеем для отображения данных о высоте либо в см, либо в мм, а также память для хранения избранных настроек положения столешницы.

Дисплей отключается, когда он не используется, тем самым экономя энергию в режиме ожидания. В качестве дополнительной функции панель можно использовать для диагностики неисправностей, так как дисплей может отображать коды ошибок.

desk panel dpf1c with display 

View the data sheet as an online magazine or download the PDF.

 

Controls/Handsets USER MANUAL

This User Manual will tell you how to install, use and maintain your LINAK DESKLINE® products.

 

DL1 SYSTEM USER MANUAL

This User Manual will tell you how to install, use and maintain your LINAK DESKLINE® products.

 

DL1A systems user manual

This User Manual will tell you how to install, use and maintain your LINAK DESKLINE® products.

 

DL2 system USER MANUAL

This User Manual will tell you how to install, use and maintain your LINAK DESKLINE® products.

 

 

 

DL2 and CBD4/CBD5/cbd6 systems
user manual 

This User Manual will tell you how to install, use and maintain your LINAK DESKLINE® products.

 

DL5/DL6 system user manual 

This User Manual will tell you how to install, use and maintain your LINAK DESKLINE® products.

 

DL7 system user manual

This User Manual will tell you how to install, use and maintain your LINAK DESKLINE® products.

 

 

 

DL15/DL16 system user manual

This User Manual will tell you how to install, use and maintain your LINAK DESKLINE® products.

 

DL15, DL16, DB16 with CBD6S User Manual

DL15, DL16, DB16 with CBD6S User Manual

This User Manual will tell you how to install, use and maintain your LINAK DESKLINE® products.

Online Magazine | PDF

 

 

DB5/DB6 system user manual 

This User Manual will tell you how to install, use and maintain your LINAK DESKLINE® products.

 

DL8, DL9, DB9, DL10 and DL11 User Manual

DL8, DL9, DB9, DL10 and DL11 User Manual

This User Manual will tell you how to install, use and maintain your LINAK DESKLINE® products.

Online Magazine | PDF

 

DL8, DL9, DL10 and DL11 With CBD6S User Manual

DL8, DL9, DL10 and DL11 with CBD6S User Manual

This User Manual will tell you how to install, use and maintain your LINAK DESKLINE® products.

Online Magazine | PDF

 

focus on shop interiors

Propelled by LINAK electric actuators, height adjustable counters allow all members of the staff to pick a position that is right for them, anytime of the day, whatever the task.

Trouble Shooting


  1. The desk does not drive at all
  2. The desk can only drive downwards
  3. How to store a memory position
  4. The height in the display is not correct
  5. The desk will not drive the full stroke upwards. Always stops in the same position
  6. The display shows E01 error code instead of the height
 

The desk does not drive at all


Check: Is the mains connected to the control box?
Try/Solution: Try to connect a lamp or similar to the mains supply to check that the supply voltage is OK.

Check: Are all plugs mounted correctly in the control box and to the leg?
Try/Solution: Check all connections.

Check: Are there any visible damages on cables, controls, the control box or legs?
Try/Solution: Damaged parts must be exchanged – contact the company where you bought your desk.

Back to top.


The desk can only drive downwards



Back to top.


How to store a memory position


  • Favourite positions e.g. for sitting and/or standing can be stored. Follow the procedure shown in the video or in the text below.


How to store a position

How to store:
1. Drive to the height you wish to store
2. Press ‘S’ and then the memory button
Your position has now been stored

To recall your memory position, press the memory button until you reach the stored position.

- Download above video: How to store a position (21Mb .wmv-file)

Back to top.


The height in the display is not correct


  • Correct the height in the display to the actual height of the desk by following the procedure shown in the video or in the text below.


How to set the height of your desk (DPF1C)
Set the height:
Measure the actual height of your desk – from floor to the upper edge of the tabletop

Set the height:
1. Press the up and down keys at the same time
2. A figure appears in the display
3. Use the up or down key to change the figure to the actual height

- Download above video: How to set the height of your desk - with DPF1C (16Mb .wmv-file)

Back to top.


The desk will not drive the full stroke upwards. Always stops in the same position

 
  • The system has set a new end-stop outwards. To erase this position, the desk must be initialised again. Follow the procedure shown in the video: How to initialise your desk.

Back to top.


The display shows E01 error code instead of the height


  • There is a malfunction in the desk. Error code E01 means that the desk must be initialised. Follow the procedure shown in the video: How to initialise your desk.

Back to top.


YouTube video - "How to initialise your desk":


How to initialise your desk
The desk cannot drive up if it has not been initialised
If display: error code E01

How to initialise:
1. Press down key and drive to the lowest position.
Hold the key until the desk stops completely

2. Reactivate the down key and hold the key until the desk stops completely.
Now the desk can drive up.

- Download above video: How to initialise your desk (16Mb .wmv-file)

Back to top.
For further information please see the DESKLINE User Manuals.

Related products

Что такое пульт управления
Пульт управления – это устройство для управления системой приводов LINAK…
Использование DESKLINE
Посмотрите примеры использования продукции DESKLINE.
Свяжитесь с компанией LINAK
Вам нужна помощь в выборе необходимой Вам специфической продукции?